Bio-rad BioLogic QuadTec™ Detector and Components Manual do Utilizador descarregar pdf (Página 18)

The traces shown on the Manual screen chromatogram and printed report are chosen in the Chromatogram

Settings window, shown in Figure 2-6. From the system toolbar, select the Settings button to display the

Manual screen Chromatogram Settings window. Select the traces from the Trace Device drop-down menu.

Select up to eight traces. Select the Visible checkbox to indicate whether or not the trace is to be visible on

the screen.

Figure 2-6. Manual Screen Chromatogram Settings

To set the QuadTec detector’s Time Constant, select Manual Setup from the Options drop-down menu. In

the Manual Setup screen, shown below, enter the QuadTec Time Constant. The Time Constant value

smooths the signal with a time filter. The default value of 1.0 seconds is suitable for most applications.

Figure 2-7. Manual Setup Screen

USE WITH THE BIOLOGIC DUO-FLOW SYSTEMSYSTEM INSTALLATION AND SETUP

2-7

Cancel

Default

-0.000

Settings for the Manual Mode

Y-axis settings

Trace Device Visible UnitsBaseline

2.000

Axis Max

Conductivity

SIM1/Signal

SIM1/pH

SIM2/Signal

SIM2/pH

GP-pressure

QuadTec-1 (220 nm)

QuadTec-2 (280 nm)

QuadTec-3 (250 nm)

QuadTec-4 (595 nm)

%Buffer B

Chromatogram Settings

Cancel

0.000

0.0 sec.

EGP Split Time Period

Select SIM

SIM 1

Minimum

1.000

Maximum

VoltUnits:

Units Range:

0.000

1.000

Device Output Range

(Volts):

Manual Setup

Edit Signal Input Module 1 - Signal

1.0 sec.

QuadTec Time Constant

10.00 ml/min

Gradient Pump : F-10 Purge FlowRate

SIM 2

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 57 58

Comentários a estes Manuais

Sem comentários

Bio-rad BioLogic QuadTec™ Detector and Components Manual do Utilizador Página 18

Comentários a estes Manuais

Manuais e produtos relacionados com Instrumentos de medida Bio-rad BioLogic QuadTec™ Detector and Components