Bio-rad S3™ Cell Sorter Manual do Utilizador Página 99
- Página / 132
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Instruction Manual | 89
10.4 Swap Nozzle Tip Wizard
10.4.1 Nozzle Tip Wizard with the Agilis System
The Agilis system uses two axis-motorized positioners that are controlled by the software.
These piezo-driven micromotors help align the stream to the pinhole and to the collinear lasers.
In addition, there are three gimbaling screws that are used to make manual adjustments to the
nozzle stage for nozzle height in relation to the pinhole and to the streams laser.
The nozzle tip must still be removed, cleaned, and reseated manually prior to alignment. The
stream must be hitting the waste hole to ensure successful results.
To swap the nozzle tip:
1. On the Setup and Maintenance tab select Swap Tip. The Swap Nozzle Tip wizard will open
(Figure 99). Follow the instructions indicated by the wizard.
2. Open the nozzle chamber door.
3. Press on the left side of the black metal light protection device and lift out of the way.
4. Locate the thumb screw hinge.
5. Loosen the thumbscrew until the nozzle body rises up and the tip can be seen.
6. Click the blue arrow.
Table 29. Cell sorter and nozzle systems.
Catalog # Cell Sorter Nozzle System Proceed to Section
145-1001, 145-1002 S3 Cell Sorter Agilis 10.4.1
145-1001, 145-1002 S3 Cell Sorter (upgraded
with AutoGimbal
™
feature)
AutoGimbal 10.4.2
145-1005, 145-1006, 145-1008 S3e Cell Sorter AutoGimbal 10.4.2
10.4 Swap Nozzle Tip Wizard
The Swap Tip wizard will walk through each step necessary to perform a successful nozzle tip
swap. Read through the wizard windows carefully and follow instructions on each screen as you
proceed with the protocol.
Clear an area around the instrument to have adequate working space. At times, adjustment to
the nozzle stage is necessary. Handle the nozzle with clean gloves.
First, determine which nozzle system is installed in your cell sorter (Table 29).
Fig. 99. Nozzle swap wizard window.
- Cell Sorters 1
- Legal Notices 3
- Bio-Rad Technical Support 3
- Safety Warning Labels 5
- Instrument Warning Labels 5
- Regulatory Compliance 6
- Biohazards 6
- Table of Contents 9
- Introduction 11
- 1.1 System Components 12
- 1.2 Installation Requirements 12
- Hardware Description 13
- 2.1.1 Instrument Back Panel 14
- 2.1.2 Aerosol Evacuation Port 14
- 2.2 Fluidics System 15
- 2.2.2 Loading Stage 16
- Instruction Manual 17
- 2.2.3 Nozzle 18
- 2.2.4 Sort Collection Chamber 18
- 2.3 Optics 19
- 2.4 Electronics 21
- Software 23
- 3.1 Main Software Window 24
- 3.1.1 Title Bar Buttons 25
- 3.1.2 File Menu 25
- 3.1.3 Home Tab Toolbar 26
- 3.2 Control Panel 30
- 3.3 Administrator Tab Toolbar 32
- 3.3.1 Editing QC Criteria 33
- 3.3.2 Edit Droplets 34
- 3.3.3 Edit Streams 34
- Instruction Manual 35
- Test Pattern highlighted 35
- 3.3.4 User Reports 36
- 3.3.5 Managing Users 37
- 3.3.6 Decontaminate 38
- 3.3.8 Global Preferences 39
- Boost Adjustment 40
- Force Cleaning 40
- Default Plot Statistics 40
- Plot Defaults 40
- Parameter Names 41
- Default Save Location 41
- Emergency Contact Information 41
- Getting Started 43
- 4.2 Logging In 44
- 4.3 Daily Startup 45
- 4.4 Quality Control 46
- 4.4.1 Droplet Setup 47
- 4.4.2 Side Streams 48
- 4.4.3 Alignment 49
- 4.4.5 Drop Delay Maintenance 50
- 4.4.6 Recalculate Drop Delay 51
- 4.4.7 QC Criteria 51
- 4.4.8 QC Report 51
- 4.5 Protocols and Workspace 52
- 4.5.3 Saving Protocols 53
- 4.5.5 Opening FCS Files 54
- 4.5.6 Saving FCS Files 55
- 4.5.10 Changing Parameters 56
- 4.5.11 Viewing Statistics 57
- 4.5.13 Creating Regions 58
- 4.5.14 Creating Gates 59
- Acquisition 61
- 5.1.1 Target Event Rate 62
- 5.1.2 Event Limit 63
- 5.1.3 Cycle Mode 63
- 5.1.4 Trigger 63
- 5.1.7 Auto Save 64
- 5.1.5 Threshold 64
- 5.1.6 PMT Voltages 64
- 5.2 Compensation 65
- Instruction Manual 67
- Fig. 61. Compensation matrix 67
- 5.2.2 Manual Compensation 69
- 5.3.1 Hot Swap 70
- Instruction Manual 71
- 5.4 Optical Filters 72
- 5.4.2 Optical Filter Blocks 73
- 6.1 Sort Setup 75
- Fig. 70. Sort Logic window 76
- 6.1.1 Sort Collection 77
- 6.1.2 Volume Tracker 77
- 6.1.3 Setting Regions to Sort 78
- 6.2 Sort Modes 79
- 6.3 Sort Statistics 79
- 6.4 Sort Plots 81
- Additional Software Features 83
- 7.4 Clean System 84
- 7.5 Instrument Status Box 85
- 7.6 Status Bar 85
- 7.8 Quality Control Reports 86
- 7.7 Printing 86
- 7.9 User Reports 87
- 7.10 Biosafety System 88
- Shutdown 89
- Instruction Manual 91
- 8.1 Daily Shutdown 91
- Automatic Startup 93
- 10.2 Dealing with Clogs 98
- Maintenance 100
- 10.4 Swap Nozzle Tip Wizard 101
- Instruction Manual 101
- Instruction Manual 103
- Instruction Manual 105
- Cleaning the nozzle tip: 108
- Sonication: 108
- Syringe wash: 108
- Instruction Manual 109
- Instruction Manual 111
- Instruction Manual 113
- 10.5 Optical Filter Cleaning 115
- 10.6 Disinfectants 115
- 10.7 Decontamination 115
- Instruction Manual 119
- Troubleshooting 121
- References 125
- and S3e 127
- Cell Sorter 127
- Specifications 127
- Ordering Information 129
- Life Science 132
- Bio-Rad 132
- Laboratories, Inc 132
Manuais e produtos relacionados com Instrumentos de medida Bio-rad S3™ Cell Sorter
Instrumentos de medida Bio-rad xMark™ Microplate Absorbance Spectrophotometer Manual do Utilizador
(20 páginas)
(20 páginas)
Instrumentos de medida Bio-rad Model 550, Ultramark, and Benchmark Microplate Rea Manual do Utilizador
(39 páginas)
(39 páginas)
Instrumentos de medida Bio-rad Model 550, Ultramark, and Benchmark Microplate Rea Manual do Utilizador
(15 páginas)
(15 páginas)
Instrumentos de medida Bio-rad Model 680 Microplate Reader Accessories Manual do Utilizador
(150 páginas)
(150 páginas)
Instrumentos de medida Bio-rad Model 550, Ultramark, and Benchmark Microplate Rea Manual do Utilizador
(31 páginas)
(31 páginas)
Instrumentos de medida Bio-rad Model 680 Microplate Reader Accessories Manual do Utilizador
(68 páginas)
(68 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.091 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais